Dantherm AD 995 – Condensation Dehumidifier with Condensate Pump (95 l/day)

The Dantherm AD 995 is a mobile condensation dehumidifier from the AD 9 series, designed for a particularly high dehumidification capacity. It removes up to 95 l/24 h at 30 °C / 80 % RH (46.5 l/24 h at 20 °C / 60 % RH) and is intended for professional applications in large areas such as industrial halls, warehouses, technical rooms and extensive water damage restoration. A condensate pump is fitted as standard and pumps the water away automatically up to a height of 4 m, so the unit never needs to be emptied manually. The unit uses the refrigerant R454C and has a sound level of 64 dB(A).

How it works

The AD 995 is operated via the CC6 control unit with a fully graphical display and three buttons. On the main screen you set the target humidity between 31 % and 99 % RH in 1 % steps; a setting of 30 % makes the unit run continuously. The fan runs at a slow (750 m³/h) or fast (900 m³/h) speed. In night mode the fan runs at the slow speed for 10 hours while the display counts down; afterwards the unit resumes dehumidifying at the fast speed. A colour-coded status indication (red, amber, green) shows the room conditions at a glance.

In the settings you choose whether the fan continues to circulate air when the target humidity is reached, and you can read the operating hours and software version. The automatic defrost function works in the background. An MID-approved kWh meter and a non-resettable hour counter are fitted as standard. The integrated interface accepts a plug-and-play dew point sensor and an external hygrostat (6.35 mm jack plug) for external on/off switching. The CC6 is prepared for wireless connection to Dantherm's optional remote monitoring system Simplify, and the software can be updated via SD card.

Key benefits

• High capacity — up to 95 l/24 h at 30 °C / 80 % RH for large-area drying.
• Integrated condensate pump — pumps the water up to 4 m high; no tank to empty, even during long operating periods or at hard-to-reach locations.
• Simple CC6 operation — 3-button control, graphical display without translation, colour-coded status indication.
• Transparent energy consumption — MID-approved kWh meter and non-resettable hour counter as standard.
• Night mode — quieter running in occupied spaces for 10 hours.
• Expandable control — plug-and-play connections for dew point sensor and external hygrostat, prepared for Simplify remote monitoring.
• Mobile and service-friendly — large wheels and a telescopic handle; main components are accessible by removing the front/top cover.

Typical applications

• Industrial halls, factories and production areas
• Warehouses and storage
• Technical rooms and waterworks
• Construction sites and commercial buildings
• Extensive water damage restoration
• Archives and preservation, rental fleets

Operating conditions and installation

• Operating temperature: 5 °C to 30 °C
• Humidity: 30 % to 90 % RH
• Minimum room size: 4 m² (use and storage only in rooms larger than 4 m²)
• Electrical supply: 230 V, 50 Hz, max. 1,900 W, 5 m cable; operate only on an earthed socket fused with an RCCB
• Protection class: IP21
• For closed indoor rooms at atmospheric pressure, e.g. basements, garages or warehouses.
• Set up upright on a stable, even surface and secure against tipping or slipping; avoid ramps and slopes.
• Keep a clearance of at least 1 m in front of the air outlet and the air intake area; do not cover the air openings.
• The supplied drain hose must always be connected; secure it on the discharge nozzle, do not kink it, do not place objects on it and do not put the hose end in water.
• After transport or prolonged storage, allow the unit to rest in its final position for approx. 15 minutes before starting.

Scope of delivery

• AD 995 dehumidifier with built-in condensate pump
• Operating manual
• Drain hose

Dew point sensor, external hygrostat and Simplify remote monitoring are not included.

Accessories

Optional:

• Dantherm spare filter for AD 975, AD 995 — product code 2004641.
• Dantherm drain hose (pump kit), silicone, transparent, 9 mm, 6 m, for AD 975, AD 995 — product code 2004960.
• External hygrostat for the Dantherm AD 9 series — product code 1110552.
• Dantherm dew point sensor for the AD 9 series — product code 2004962.
• Simplify remote monitoring — optional wireless monitoring solution from Dantherm Group.

Technical data

• Article number: 2000127 · EAN: 4052138160763
• Product width: 502 mm
• Product length: 547 mm
• Product height: 906 mm
• Product weight: 58.2 kg
• Fan stages: 2
• Dehumidification capacity max.: 95 l/24 h
• Cable length: 5 m
• Mains connection and frequency: 230 V, 50 Hz
• Power consumption: 1,900 W
• Temperature range max.: 30 °C
• Temperature range min.: 5 °C
• Minimum room size: 4 m²
• Air humidity max.: 90 % RH
• Air humidity min.: 30 % RH
• CO2 equivalent: 0.081 t
• Pressure, discharge side: 2.2 MPa
• Pressure, suction side: 0.6 MPa
• GWP factor: 148
• Refrigerant quantity: 550 g
• Refrigerant type: R454C
• Max. permissible pressure: 3 MPa
• Device type: condensation
• Fan type: radial
• Compressor: rolling piston compressor
• IP protection class: IP21
• Air volume: stage 1: 750 m³/h; stage 2: 900 m³/h; night mode: 750 m³/h
• Dehumidification capacity: 95 l/24 h at 30 °C / 80 % RH; 46.5 l/24 h at 20 °C / 60 % RH; max. 95 l/24 h
• Sound level: max. 64 dB(A)
• Equipment: colour-coded status indication of room conditions, energy consumption meter (MID-compliant), integrated interface for accessories (dew point kit and external hygrostat), night mode, operating hours counter, plug-and-play connection for external on/off switching (with external hygrostat), plug-and-play dew point sensor, Simplify remote monitoring system, software update function
• Design: mobile unit with telescopic handle and wheels

Frequently asked questions

Does the condensate have to be emptied?
No. The AD 995 is fitted with a condensate pump as standard, which pumps the water away automatically via the supplied drain hose up to a height of 4 m. The drain hose must always be connected.

Can the AD 995 be controlled by an external hygrostat or a dew point sensor?
Yes. An external hygrostat is plugged into the integrated interface with a 6.35 mm jack plug; the unit is then set to continuous operation and switched on and off by the hygrostat. With the plug-and-play dew point sensor, the unit automatically switches to dew point operation and starts as soon as the temperature falls below the dew point. Both are optional accessories.

How does the night mode work?
In night mode the fan runs at the slow speed (750 m³/h) for 10 hours and the display counts down the remaining time. Afterwards the unit resumes dehumidifying at the fast fan speed. Switching the unit off or disconnecting the mains plug resets the night mode.

What maintenance does the AD 995 need?
With the unit switched off and unplugged, remove the air filter, clean it (e.g. with a vacuum cleaner) or replace it with an original filter, and check the discharge nozzle and drain hose. Work on the electrical components and the refrigeration circuit is reserved for the manufacturer or authorised personnel.

Original Dantherm equipment (Dantherm Group) — supplied with full manufacturer documentation by BMB Rheinland, your authorised distribution partner.

Planning a project or a larger requirement? Request a quote.

Downloads

• 📄 Operating manual Dantherm AD 995 (DE/EN and 15 further languages)
• 📄 Product guide Dantherm AD 995 (EN)
• 📄 Product guide Dantherm AD 995 (DE)