Dantherm Aerial AD 750-P – Condensation Dehumidifier with Integrated Pump (50 l/day)
Available to order: typical lead time 5–10 working days. We confirm the exact date after your order or enquiry.
The Aerial AD 750-P from Dantherm is a condensation dehumidifier with a built-in condensate pump, designed to regulate humidity in closed indoor spaces efficiently and permanently and to protect the building fabric and stored materials. It removes up to 50 l/24h (30 °C / 80 % RH), is recommended for rooms up to 260 m² / 650 m³ (construction drying: 200 m² / 500 m³) and pumps the condensate away automatically through the drain hose, so it can run continuously without manual emptying. Power input is 900 W at 230 V, 50 Hz, protection class IPX4.
How it works
The AD 750-P works on the principle of refrigeration drying: a rotary piston compressor cools the evaporator, moisture from the room air condenses on it and the drier air is returned to the room at up to 710 m³/h. Ice that forms on the evaporator is removed by an automatic hot-gas defrost, so the unit keeps working reliably under demanding conditions. Unlike models with a condensate container, the AD 750-P has a permanently installed internal pump that pumps the condensate out through the supplied drain hose.
Operation is hygrostat-controlled: switch the unit on with the on/off button and turn the hygrostat from "0" towards "Cont." to the desired humidity ("Cont." = continuous operation). The unit only starts when the actual room humidity is above the set value, runs for at least 10 minutes and, once the target humidity is reached, the fan runs on for 30 minutes. Signal lights and the display show room temperature, room humidity, operating status and operating hours, including a separate indication for pump faults. A rocker switch "Pump" lets you pump out remaining water manually, for example before moving the unit. The unit restarts automatically after a power failure.
Key benefits
- Integrated condensate pump — condensate is pumped away automatically through the drain hose, enabling continuous operation without manual emptying.
- 50 l/24h dehumidification — 50 l/24h at 30 °C / 80 % RH, 23 l/24h at 20 °C / 60 % RH and 17 l/24h at 15 °C / 70 % RH.
- Automatic hot-gas defrost — keeps performance continuous and reliable under demanding conditions.
- Hygrostat control with auto-restart — set the target humidity or choose continuous operation; after a power failure the unit restarts automatically.
- Energy and runtime records — energy consumption meter (MID-compliant*) and operating hours counter fitted.
- IPX4 plastic housing — protected against splashing water from all directions.
- Mobile on site — wheels and carrying/transport handles for moving the 42 kg unit.
Typical applications
- Basements
- Garages
- Warehouses and storage halls
- Construction drying (recommended room size 200 m² / 500 m³)
- Applications that require continuous water discharge over longer periods
Operating conditions and installation
- Operating temperature: 5 °C to 32 °C
- Relative humidity: 35 % to 95 % RH
- Minimum room size: 4 m²
- Electrical supply: 230 V, 50 Hz, 900 W, 4.5 m power cable; earthed socket; install a residual current device (RCD) in damp rooms and on construction sites
- Protection class: IPX4 (protection against splashing water from all directions)
- Condensate drain: the supplied drain hose must always be connected; lead it away from the unit into a drain or suitable container, maximum height difference 3 m; do not kink the hose or place objects on it
- Installation: transport upright and secure against tipping or slipping; set up on a level, firm surface; keep at least 1 m clearance in front of the air outlet and the air filter; let the unit rest for about 15 minutes before first start, after transport and after longer storage
- Not for use in explosive or aggressive atmospheres, in rooms with salt or saline liquids (salt content > 1 %), with water outside pH 7.0 to 7.4, or with ozone-treated air, high solvent concentration or high dust load
Scope of delivery
- 1 x Aerial AD 750-P condensation dehumidifier with integrated condensate pump
- 1 x Drain hose 12 x 2 mm with hose clamp
- 1 x Operating manual
Accessories
The drain hose required for operation is included. Optional accessories named by the manufacturer for the AD 750-P:
- Aerial drain hose, 12 x 2 mm (5501-0005)
- Aerial spare filter for AD 750 / AD 750-P (5107-0006)
Technical data
- Article number: 2000110 · EAN: 4260393632271
- Product width: 520 mm
- Product length: 495 mm
- Product height: 880 mm
- Product weight: 42 kg
- Recommended room size: 260 m²
- Recommended room size: 650 m³
- Recommended room size, construction drying: 200 m²
- Recommended room size, construction drying: 500 m³
- Dehumidification capacity max.: 50 l/24h
- Cable length: 4.5 m
- Mains connection and frequency: 230 V, 50 Hz
- Power input: 900 W
- Sound pressure level: 53 dB(A)
- Temperature range max.: 32 °C
- Temperature range min.: 5 °C
- Minimum room size: 4 m²
- Humidity max.: 95 % RH
- Humidity min.: 35 % RH
- CO2 equivalent: 0.081 t
- GWP factor: 148
- Refrigerant quantity: 550 g
- Refrigerant type: R454C
- Device type: condensation
- Operating principle: refrigeration drying
- Automatic dehumidification: hygrostat-controlled
- Compressor: rotary piston compressor
- Automatic defrost: hot gas
- Condensate drain: condensate pump
- Housing: plastic
- Protection class: IPX4
- Protection against water: protection against splashing water from all directions
- Air volume max.: 710 m³/h
- Dehumidification capacity at 15 °C / 70 % RH: 17 l/24h
- Dehumidification capacity at 20 °C / 60 % RH: 23 l/24h
- Dehumidification capacity at 30 °C / 80 % RH: 50 l/24h
- Dehumidification capacity max.: 50 l/24h
- Power input at 15 °C / 70 % RH: 537 W
- Power input at 20 °C / 60 % RH: 610 W
- Power input at 30 °C / 80 % RH: 850 W
- Equipment: auto-restart function · energy consumption meter (MID-compliant*) · integrated condensate pump · operating hours counter
- Design: carrying/transport handle(s) · wheels
Frequently asked questions
Does the AD 750-P need to be emptied by hand?
No. The AD 750-P has a permanently installed internal pump that pumps the condensate away through the drain hose, so it can run continuously. The supplied drain hose (12 x 2 mm with hose clamp) must always be connected and led into a drain or suitable container with a maximum height difference of 3 m.
How do I empty the AD 750-P before moving it?
Make sure the drain hose leads into a drain or suitable container, then press and hold the rocker switch "Pump" until the condensate has been pumped out. Then turn the hygrostat to "0", set the on/off button to "0" and disconnect the drain hose and the power cable before transport.
Which electrical supply does the AD 750-P need?
230 V, 50 Hz with a maximum power input of 900 W; the power cable is 4.5 m long. Use an earthed socket and, in damp rooms and on construction sites, a residual current device (RCD).
How large a room can the AD 750-P dehumidify?
The manufacturer recommends it for rooms up to 260 m² / 650 m³ and, for construction drying, up to 200 m² / 500 m³. The room must have a floor area of at least 4 m².
Original Dantherm equipment (Dantherm Group) — supplied with full manufacturer documentation by BMB Rheinland, your authorised distribution partner.
Planning a project or a larger requirement? Request a quote.
Downloads
Manufacturer information (GPSR)
Manufacturer: Dantherm GmbH, Oststrasse 148, 22844 Norderstedt, Germany, info.de@danthermgroup.com, www.danthermgroup.com
Product identification: model and article number as stated on this page and on the type plate.
Safety information and warnings: see the operating manual of the manufacturer supplied with the product.
Product compliance and certifications depend on the specific product and manufacturer.
CE marking: Products carry CE marking where required by applicable EU legislation. The relevant conformity information is provided in the manufacturer's documentation where legally required.
Product-specific standards: Applicable standards, certifications, and classifications, such as HEPA filter classes under EN 1822 or hygiene requirements under VDI 6022, are indicated in the product specifications or manufacturer documentation where verified.
Manufacturer and origin: Products are supplied under their respective manufacturer's brand. The country of origin, quality management certifications, and other manufacturer-specific information are stated only where verified.
Documentation: Available technical information, operating instructions, and conformity documents can be found in the Downloads section or obtained from us upon request, where available. Legally required product documentation is provided in accordance with applicable requirements.
Delivery: We supply business customers and consumers within the European Union, subject to product availability and applicable delivery conditions. Delivery costs and estimated delivery times are provided during the ordering process or in our individual quotation. Freight and pallet deliveries can be arranged depending on the product and delivery address.
Delivery times: The delivery period applicable to your order is stated before purchase or in the individual quotation. For orders requiring separate confirmation, we provide the applicable delivery information before the contract is concluded.
Statutory rights: All customers retain their applicable statutory rights in respect of defective goods. For consumers purchasing new goods, statutory defect claims generally have a limitation period of two years from delivery, subject to applicable legal provisions. Any separate manufacturer's warranty applies only where expressly offered and does not limit statutory rights against us as the seller.
Consumer withdrawal: Consumers generally have a statutory right to withdraw from qualifying distance contracts within 14 days, subject to statutory exceptions. Further information is provided in our Withdrawal Policy (Widerrufsbelehrung).
Business customers: Business purchases are subject to the applicable statutory provisions and any validly agreed contractual conditions. Commercial buyers must comply with their statutory inspection and notification obligations where applicable, including Section 377 of the German Commercial Code (HGB).
Returns and complaints: Please contact us regarding returns, incorrect deliveries, or defective goods so that we can coordinate the next steps. Further information is provided in our Refund Policy and General Terms and Conditions. These policies do not restrict mandatory statutory rights.
For project, bulk, and pallet orders, please contact us for an individual quotation.
