TROTEC VSP-VS 8.4-3000 – Videoscope Probe for VSP-Control (Ø 8.4 mm)
Available to order: typical lead time 5–10 working days. We confirm the exact date after your order or enquiry.
The TROTEC VSP-VS 8.4-3000 is a videoscope probe (video endoscope) for combined inspection use with the TROTEC VSP-Control control unit, which is required for image display and recording. The probe has an 8.4 mm diameter, a camera head that can be angled continuously in all directions, a field of view of more than 120° and a depth of field from 25 mm to infinity. Its robust multi-layer probe of tungsten wire braid with titanium alloy combines maximum flexibility with high torsional strength.
How it works
You plug the multi-plug of the approx. 150 cm connection cable into the multi-plug socket of the VSP-Control and switch the control unit on. The probe is then held by its pistol grip: the joystick on the grip angles the camera head up, down, left and right, and the keypad controls the illumination brightness and triggers photos and videos. According to the VSP3041 operating manual, photos and videos can be started either on the probe or on the VSP-Control and are saved to the SD card of the VSP-Control; pressing the brightness-minus key repeatedly switches the LEDs at the camera head off completely.
Key benefits
- Camera head angled in all directions — continuously steerable up, down, left and right via joystick.
- Flexible yet torsion-resistant — robust multi-wall probe of tungsten wire braid with titanium alloy.
- Wide view — field of view of more than 120°.
- Large depth of field — 25 mm to infinity.
- One-hand operation at the grip — pistol grip with keypad and joystick control for angling, brightness and photo/video.
- Dust-tight and splash-proof — protection class IP64.
- Part of the modular VSP system — connects to the same VSP-Control as the TROTEC pipe camera and borescope probes.
Typical applications
- Inspection of concealed machine parts with the VSP-Control
- Inspection of cavities that are difficult or impossible to access
- Visual inspections with photo and video documentation on the VSP-Control
Operating conditions and installation
- Required base unit: TROTEC VSP-Control control unit (not included); connection via the multi-plug cable, length approx. 150 cm
- Protection class: IP64 (complete protection against contact, protection against splashing water from all sides, dust-tight)
- According to the VSP3041 operating manual: never use the probe to clear material from an object or to pierce anything; do not use in potentially explosive areas, in live electrical environments or on people or animals
- TROTEC does not state an operating temperature range for the probe
Scope of delivery
The scope of delivery follows the manufacturer's specification; please ask us if you need a detailed list. The VSP-Control control unit required for operation is a separate article.
Accessories
Required: TROTEC VSP-Control control unit (article 3110007110) for image display, recording and storage. No optional accessories are named by the manufacturer for this probe.
Technical data
- Article number: 3110007164 · EAN: 4052138178645
- Length without packaging: 155 mm
- Width without packaging: 110 mm
- Height without packaging: 190 mm
- Weight without packaging: 0.62 kg
- Probe diameter Ø: 8.4 mm
- Field of view: >120°
- Depth of field: 25 mm to ∞
- Equipment: pistol grip with keypad and joystick control; angling up/down/left/right; illumination brightness; photo/video recording; probe head angling
- Design: probe of tungsten wire braid with titanium alloy
- Interfaces: connection cable with multi-plug for VSP-Control, length approx. 150 cm
- IP rating: IP64 (complete protection against contact; protection against splashing water from all sides; dust-tight)
Frequently asked questions
Which base unit do I need for the VSP-VS 8.4-3000?
The TROTEC VSP-Control control unit. TROTEC specifies the probe for combined inspection use with the VSP-Control; the probe connects to it with the multi-plug cable of approx. 150 cm.
How is the camera head steered?
With the joystick on the pistol grip; the head can be angled continuously up, down, left and right.
Where are photos and videos saved?
Recordings are triggered on the probe grip or on the VSP-Control and saved on the SD card of the VSP-Control, according to the VSP3041 operating manual.
Is the probe waterproof?
The probe is rated IP64: dust-tight and protected against splashing water from all sides. TROTEC does not specify it for immersion.
Original TROTEC equipment — supplied with full manufacturer documentation by BMB Rheinland, your authorised distribution partner.
Planning a project or a larger requirement? Request a quote.
Downloads
Manufacturer information (GPSR)
Manufacturer: Trotec GmbH, Grebbener Strasse 7, 52525 Heinsberg, Germany, info@trotec.de, de.trotec.com
Product identification: model and article number as stated on this page and on the type plate.
Safety information and warnings: see the operating manual of the manufacturer supplied with the product.
Product compliance and certifications depend on the specific product and manufacturer.
CE marking: Products carry CE marking where required by applicable EU legislation. The relevant conformity information is provided in the manufacturer's documentation where legally required.
Product-specific standards: Applicable standards, certifications, and classifications, such as HEPA filter classes under EN 1822 or hygiene requirements under VDI 6022, are indicated in the product specifications or manufacturer documentation where verified.
Manufacturer and origin: Products are supplied under their respective manufacturer's brand. The country of origin, quality management certifications, and other manufacturer-specific information are stated only where verified.
Documentation: Available technical information, operating instructions, and conformity documents can be found in the Downloads section or obtained from us upon request, where available. Legally required product documentation is provided in accordance with applicable requirements.
Delivery: We supply business customers and consumers within the European Union, subject to product availability and applicable delivery conditions. Delivery costs and estimated delivery times are provided during the ordering process or in our individual quotation. Freight and pallet deliveries can be arranged depending on the product and delivery address.
Delivery times: The delivery period applicable to your order is stated before purchase or in the individual quotation. For orders requiring separate confirmation, we provide the applicable delivery information before the contract is concluded.
Statutory rights: All customers retain their applicable statutory rights in respect of defective goods. For consumers purchasing new goods, statutory defect claims generally have a limitation period of two years from delivery, subject to applicable legal provisions. Any separate manufacturer's warranty applies only where expressly offered and does not limit statutory rights against us as the seller.
Consumer withdrawal: Consumers generally have a statutory right to withdraw from qualifying distance contracts within 14 days, subject to statutory exceptions. Further information is provided in our Withdrawal Policy (Widerrufsbelehrung).
Business customers: Business purchases are subject to the applicable statutory provisions and any validly agreed contractual conditions. Commercial buyers must comply with their statutory inspection and notification obligations where applicable, including Section 377 of the German Commercial Code (HGB).
Returns and complaints: Please contact us regarding returns, incorrect deliveries, or defective goods so that we can coordinate the next steps. Further information is provided in our Refund Policy and General Terms and Conditions. These policies do not restrict mandatory statutory rights.
For project, bulk, and pallet orders, please contact us for an individual quotation.
