TROTEC TTK 166 ECO – Commercial Dehumidifier, 4-Pack (up to 52 l/day per unit)
Available to order: typical lead time 5–10 working days. We confirm the exact date after your order or enquiry.
This package contains four identical TROTEC TTK 166 ECO commercial dehumidifiers. Each unit removes up to 52 l/24h (50 l/24h at 30 °C / 80 % r.h.) with an air flow of 300 m³/h and is designed for rooms up to 90 m² / 230 m³. The pack suits contractors who run several units at the same time, for example for new-build drying after screed and plaster work, water damage restoration or the permanent dehumidification of warehouses, archives and workshops. Every unit has a hygrostat-controlled automatic mode, a 7 l condensate tank with drain hose connection, the natural refrigerant R290 and a robust coated steel trolley in signal red. Pallet shipment: all four units are delivered together on one Euro pallet (1200 x 800 mm). Please make sure the pallet can be received and unloaded at the delivery address.
How it works
The TTK 166 ECO works on the condensation principle: the fan draws humid room air through the air filter, the evaporator and the condenser. On the cold evaporator the air is cooled below its dew point, the moisture condenses and drips into the condensate tank, which is fitted with a float. The dried air is slightly warmed at the condenser and blown back into the room. According to the manual, the unit can lower the relative humidity to approx. 30 %.
Operation is via a control panel with POWER and TIMER keys, arrow keys and an LED display. The display shows the current relative humidity, the target humidity while it is being set, the room temperature, the timer hours, compressor and fan operation, a full or incorrectly inserted tank and the automatic defrosting. You set the target humidity between 10 % and 95 % in 1 % steps; the integrated hygrostat switches the compressor off when the target is reached and back on when the humidity rises again. The manual gives 30 % to 80 % r.h. as the range for effective dehumidification. The timer switches the unit on or off automatically after 1 to 24 hours, and the memory function restarts the unit with the stored target humidity after short power interruptions. At low ambient temperatures the unit defrosts automatically by circulating air (max. 8 minutes, FROST indicator).
Key benefits
- Hygrostat-controlled automatic mode — target humidity adjustable from 10 % to 95 % r.h. in 1 % steps; the unit regulates itself and prevents over-drying.
- Continuous operation with drain hose — 13 mm hose connection and a 1 m drain hose included, so the condensate can be drained continuously during longer unattended drying jobs.
- Memory function and timer — automatic restart with the stored setting after short power cuts, plus automatic switch-on or switch-off after 1 to 24 hours.
- Robust trolley design for construction sites — coated steel housing in signal red, large non-marking solid rubber tyres, transport handle and a cable holder on the rear for transport and storage.
- Tank monitoring — full-tank warning light and overflow protection with automatic shut-off when the 7 l tank is full or not inserted correctly.
- Natural refrigerant R290 — propane with a GWP of 3 (200 g, CO2 equivalent 0.0006 t), combined with a rolling piston compressor.
- Information at a glance — LED display of room humidity and room temperature, automatic fault diagnosis with error codes and an adjustable humidity correction value (-9 to +9).
Typical applications
- New-build drying: speeding up building drying after screed and plaster work
- Water damage restoration after mains water damage, flooding or inundation
- Painting and drywall work: faster drying of filler, paint and plaster
- Renovation work: moisture control in the renovation of old and listed buildings
- Permanent dehumidification of warehouses, archives, workshops, basements, storage rooms and depots
Operating conditions and installation
- Operating range: 5 °C to 35 °C and 10 % to 95 % r.h.
- Electrical supply: 220 - 240 V, 50 Hz; power consumption 950 W; rated current 4 A; recommended fuse protection 10 A; current required at start-up 16 A; plug CEE 7/7.
- Protection class IP22 (protection against dripping water falling at an angle of up to 15°). Do not use the unit outdoors, on wet or flooded floors or in the immediate vicinity of showers or swimming pools.
- Refrigerant R290: install, operate and store the unit only in rooms with a floor area of more than 15 m², in which refrigerant losses cannot accumulate and without continuously open flames or other ignition sources.
- Minimum distances to walls and objects: 50 cm above, 50 cm behind, 50 cm at the sides and 100 cm in front.
- Set up the unit upright and stable on a level, firm surface, operate it only in an upright position and do not tilt it by more than 45°. Do not operate the unit without the air filter.
- Before first use, the stand foot, the transport wheels with axle and the transport handle must be mounted. After mounting, let the unit stand upright for 12 to 24 hours before switching it on, as specified in the manual.
Scope of delivery
4 x the scope of delivery of the single unit as stated in the manual:
- 4 x TTK 166 ECO dehumidifier
- 4 x air filter
- 8 x transport wheel (2 per unit)
- 4 x transport handle
- 4 x stand foot
- 4 x axle
- 8 x washer and 8 x nut (2 each per unit)
- 16 x large screw and 16 x small screw (4 each per unit)
- 4 x condensate drain hose, length 1 m, diameter 13 mm
- 4 x operating manual
The condensate pump and the other accessories listed below are not included.
Accessories
Optional, named by TROTEC for the TTK 166 ECO:
- Air filter for TTK 166 ECO (TROTEC item 7.710.000.850)
- External condensate pump (TROTEC item 6.100.003.020), if the condensate has to be pumped to a higher drain
- Cable drum PVD1EU with 20 m cable (TROTEC item 7.333.000.365)
- Professional extension cable 20 m / 230 V / 2.5 mm² (TROTEC item 7.333.000.376)
Technical data
All values per unit, as published by TROTEC.
- Pack contents: 4 units
- Shipping: pallet shipment, one Euro pallet (1200 x 800 mm)
- Total shipping weight: 4 x 34 kg = 136 kg
- Article number: 1120001116 (4 units) · EAN of the single unit: 4052138016787
- Length without packaging: 480 mm
- Length with packaging: 630 mm
- Width without packaging: 450 mm
- Width with packaging: 420 mm
- Height without packaging: 655 mm
- Height with packaging: 630 mm
- Weight without packaging: 30 kg
- Weight including packaging: 34 kg
- Recommended room size: 90 m²
- Recommended room volume: 230 m³
- Fan stages: 1
- Water tank capacity: 7 l
- Recommended hose size: 13 mm
- Rated current: 4 A
- Mains connection and frequency: 220 - 240 V, 50 Hz
- Power consumption: 950 W
- Recommended fuse protection: 10 A
- Current required at start-up: 16 A
- Temperature range, max.: 35 °C
- Temperature range, min.: 5 °C
- Minimum room size: 15 m²
- Humidity, max.: 95 % r.h.
- Humidity, min.: 10 % r.h.
- CO2 equivalent: 0.0006 t
- Pressure, discharge side: 2.5 MPa
- Pressure, suction side: 1 MPa
- GWP factor: 3
- Refrigerant quantity: 200 g
- Refrigerant type: R290
- Max. permissible pressure: 2.5 MPa
- Device type: condensation
- Fan type: axial
- Equipment: automatic fault diagnosis system; cable holder; current room temperature display; relative humidity display; fan run-on function; LED display; memory function; timer function
- Functional principle: refrigeration drying
- Automatic dehumidification: electronic hygrostat; hygrostat-controlled; nonstop dehumidification
- Compressor: rolling piston compressor
- Automatic defrost: electronic, by circulating air
- Room air filter: cleanable; easily accessible
- Condensate drain: hose connection possible
- Condensate tank monitoring: tank present; full-tank warning light; overflow protection with automatic shut-off
- Design: coated steel housing; mobility: cable winder, trolley design, carrying/transport handle(s), feet, non-marking solid rubber tyres
- Connector plug: CEE 7/7
- IP protection class: IP22 (protection against access with a finger or similar; protection against dripping water falling at an angle of up to 15°; protection against solid foreign objects with a diameter ≥ 12.5 mm)
- Air flow, max.: 300 m³/h
- Dehumidification capacity at 20 °C / 60 % r.h.: 20 l/24h
- Dehumidification capacity at 30 °C / 80 % r.h.: 50 l/24h
- Dehumidification capacity, max.: 52 l/24h
- Sound level (1 m distance, stage 1): 56 dB(A)
Frequently asked questions
How much moisture does each TTK 166 ECO remove per day?
TROTEC states 50 l/24h at 30 °C and 80 % r.h., 20 l/24h at 20 °C and 60 % r.h. and a maximum of 52 l/24h. The actual output depends on room temperature and humidity.
Can the units run unattended for longer periods?
Yes. Each unit comes with a 1 m drain hose (13 mm) that drains the condensate continuously to a drain or a sufficiently large container; the hose can be used in any operating mode. When you connect the hose for the first time, the condensate tank has to be prepared as described in the manual: unscrew the closure on the tank and drill through the tank at this point.
Do the units need to be assembled?
Yes. Before first use, mount the stand foot, the two transport wheels with axle and the transport handle on each unit; all parts and screws are included. After mounting, let each unit stand upright for 12 to 24 hours before switching it on, so that the refrigerant can collect in the compressor.
What room size is each unit designed for?
TROTEC specifies rooms up to 90 m² or 230 m³. Because of the refrigerant R290, each unit may only be installed, operated and stored in a room with a floor area of more than 15 m².
What happens when the tank is full?
When the 7 l tank is full or not inserted correctly, the tank warning light comes on and the unit stops automatically; the fan runs on for approx. 3 minutes. Always switch the unit off and pull the mains plug before removing the tank.
Can I order a different quantity?
This offer is a pack of four units. For other quantities, please request a quote.
Original TROTEC equipment — supplied with full manufacturer documentation by BMB Rheinland, your authorised distribution partner.
Planning a project or a larger requirement? Request a quote.
Downloads
Manufacturer information (GPSR)
Manufacturer: Trotec GmbH, Grebbener Strasse 7, 52525 Heinsberg, Germany, info@trotec.de, de.trotec.com
Product identification: model and article number as stated on this page and on the type plate.
Safety information and warnings: see the operating manual of the manufacturer supplied with the product.
Product compliance and certifications depend on the specific product and manufacturer.
CE marking: Products carry CE marking where required by applicable EU legislation. The relevant conformity information is provided in the manufacturer's documentation where legally required.
Product-specific standards: Applicable standards, certifications, and classifications, such as HEPA filter classes under EN 1822 or hygiene requirements under VDI 6022, are indicated in the product specifications or manufacturer documentation where verified.
Manufacturer and origin: Products are supplied under their respective manufacturer's brand. The country of origin, quality management certifications, and other manufacturer-specific information are stated only where verified.
Documentation: Available technical information, operating instructions, and conformity documents can be found in the Downloads section or obtained from us upon request, where available. Legally required product documentation is provided in accordance with applicable requirements.
Delivery: We supply business customers and consumers within the European Union, subject to product availability and applicable delivery conditions. Delivery costs and estimated delivery times are provided during the ordering process or in our individual quotation. Freight and pallet deliveries can be arranged depending on the product and delivery address.
Delivery times: The delivery period applicable to your order is stated before purchase or in the individual quotation. For orders requiring separate confirmation, we provide the applicable delivery information before the contract is concluded.
Statutory rights: All customers retain their applicable statutory rights in respect of defective goods. For consumers purchasing new goods, statutory defect claims generally have a limitation period of two years from delivery, subject to applicable legal provisions. Any separate manufacturer's warranty applies only where expressly offered and does not limit statutory rights against us as the seller.
Consumer withdrawal: Consumers generally have a statutory right to withdraw from qualifying distance contracts within 14 days, subject to statutory exceptions. Further information is provided in our Withdrawal Policy (Widerrufsbelehrung).
Business customers: Business purchases are subject to the applicable statutory provisions and any validly agreed contractual conditions. Commercial buyers must comply with their statutory inspection and notification obligations where applicable, including Section 377 of the German Commercial Code (HGB).
Returns and complaints: Please contact us regarding returns, incorrect deliveries, or defective goods so that we can coordinate the next steps. Further information is provided in our Refund Policy and General Terms and Conditions. These policies do not restrict mandatory statutory rights.
For project, bulk, and pallet orders, please contact us for an individual quotation.
