TROTEC VSP-BS 6.4F – Borescope Probe for VSP-Control (Ø 6.4 mm)
Available to order: typical lead time 5–10 working days. We confirm the exact date after your order or enquiry.
The TROTEC VSP-BS 6.4F is a borescope probe for the TROTEC VSP system. For image display and storage it is simply connected to the TROTEC VSP-Control control unit, which is required for operation. The stainless-steel probe has a diameter of 6.4 mm and a length of 250 mm, a field of view of more than 120°, a depth of field from 15 mm to infinity and an image resolution of 1,000,000 pixels.
How it works
Plug the multi-plug of the approx. 150 cm connection cable into the multi-plug socket on the top of the VSP-Control and switch the control unit on. The borescope is then controlled both from the VSP-Control and from the keypad on its pistol grip: the brightness keys adjust the LEDs at the camera head (repeatedly pressing brightness minus switches them off), the photo key takes a picture and, where provided by the probe, the video key starts and stops a recording. The probe has a front/side view switch key. Recordings are saved on the SD card of the VSP-Control, according to the VSP3041 operating manual. TROTEC offers VSP-BS borescopes with different probe diameters and front, side or dual-view cameras to suit each application.
Key benefits
- Slim stainless-steel probe — Ø 6.4 mm, 250 mm length.
- Wide view — field of view of more than 120°.
- Large depth of field — 15 mm to infinity.
- 1,000,000-pixel image resolution — detailed images on the VSP-Control display.
- Front/side view switch — change of view via a key on the grip.
- Operation at the grip — pistol grip with keypad for illumination brightness and photo/video.
- Dust-tight and splash-proof — protection class IP64.
Typical applications
- Inspection of concealed machine parts with the VSP-Control
- Inspection of cavities that are difficult or impossible to access
- Visual inspections with photo and video documentation on the VSP-Control
Operating conditions and installation
- Required base unit: TROTEC VSP-Control control unit (not included); connection via the multi-plug cable, length approx. 150 cm
- Protection class: IP64 (complete protection against contact, protection against splashing water from all sides, dust-tight)
- According to the VSP3041 operating manual: never use the borescope probe to clear material from an object or to pierce anything; do not use in potentially explosive areas, in live electrical environments or on people or animals
- TROTEC does not state an operating temperature range for the probe
Scope of delivery
The scope of delivery follows the manufacturer's specification; please ask us if you need a detailed list. The VSP-Control control unit required for operation is a separate article.
Accessories
Required: TROTEC VSP-Control control unit (article 3110007110) for image display, recording and storage. No optional accessories are named by the manufacturer for this probe.
Technical data
- Article number: 3110007192 · EAN: 4052138048740
- Length without packaging: 175 mm
- Width without packaging: 67 mm
- Height without packaging: 50 mm
- Weight without packaging: 0.2 kg
- Probe / camera head length: 250 mm
- Probe diameter Ø: 6.4 mm
- Field of view: >120°
- Depth of field: 15 mm to ∞
- Equipment: front/side view switch key; illumination brightness; photo/video recording; pistol grip with keypad
- Design: stainless-steel probe
- Interfaces: connection cable with multi-plug for VSP-Control, length approx. 150 cm
- Image resolution: 1,000,000 pixels
- IP rating: IP64 (complete protection against contact; protection against splashing water from all sides; dust-tight)
Frequently asked questions
Which base unit do I need for the VSP-BS 6.4F?
The TROTEC VSP-Control control unit. The borescope is connected to it for image display and storage via the multi-plug cable of approx. 150 cm.
Can I switch between front and side view?
The VSP-BS 6.4F has a front/side view switch key on the grip, according to the TROTEC equipment data.
What should the probe not be used for?
According to the VSP3041 operating manual, the borescope probe must never be used to clear material from an object or to pierce anything.
How deep can it reach?
The stainless-steel probe is 250 mm long with a diameter of 6.4 mm.
Original TROTEC equipment — supplied with full manufacturer documentation by BMB Rheinland, your authorised distribution partner.
Planning a project or a larger requirement? Request a quote.
Downloads
Manufacturer information (GPSR)
Manufacturer: Trotec GmbH, Grebbener Strasse 7, 52525 Heinsberg, Germany, info@trotec.de, de.trotec.com
Product identification: model and article number as stated on this page and on the type plate.
Safety information and warnings: see the operating manual of the manufacturer supplied with the product.
Product compliance and certifications depend on the specific product and manufacturer.
CE marking: Products carry CE marking where required by applicable EU legislation. The relevant conformity information is provided in the manufacturer's documentation where legally required.
Product-specific standards: Applicable standards, certifications, and classifications, such as HEPA filter classes under EN 1822 or hygiene requirements under VDI 6022, are indicated in the product specifications or manufacturer documentation where verified.
Manufacturer and origin: Products are supplied under their respective manufacturer's brand. The country of origin, quality management certifications, and other manufacturer-specific information are stated only where verified.
Documentation: Available technical information, operating instructions, and conformity documents can be found in the Downloads section or obtained from us upon request, where available. Legally required product documentation is provided in accordance with applicable requirements.
Delivery: We supply business customers and consumers within the European Union, subject to product availability and applicable delivery conditions. Delivery costs and estimated delivery times are provided during the ordering process or in our individual quotation. Freight and pallet deliveries can be arranged depending on the product and delivery address.
Delivery times: The delivery period applicable to your order is stated before purchase or in the individual quotation. For orders requiring separate confirmation, we provide the applicable delivery information before the contract is concluded.
Statutory rights: All customers retain their applicable statutory rights in respect of defective goods. For consumers purchasing new goods, statutory defect claims generally have a limitation period of two years from delivery, subject to applicable legal provisions. Any separate manufacturer's warranty applies only where expressly offered and does not limit statutory rights against us as the seller.
Consumer withdrawal: Consumers generally have a statutory right to withdraw from qualifying distance contracts within 14 days, subject to statutory exceptions. Further information is provided in our Withdrawal Policy (Widerrufsbelehrung).
Business customers: Business purchases are subject to the applicable statutory provisions and any validly agreed contractual conditions. Commercial buyers must comply with their statutory inspection and notification obligations where applicable, including Section 377 of the German Commercial Code (HGB).
Returns and complaints: Please contact us regarding returns, incorrect deliveries, or defective goods so that we can coordinate the next steps. Further information is provided in our Refund Policy and General Terms and Conditions. These policies do not restrict mandatory statutory rights.
For project, bulk, and pallet orders, please contact us for an individual quotation.
