TROTEC TAC M TOWER — Professional HEPA H14 Stationary Air Cleaning Unit
RRP is the manufacturer TROTEC's current recommended retail price for the German market including 19 % VAT. The comparison does not refer to a previous selling price of BMB Rheinland GmbH.
- HEPA H14 · EN 1822 certified
Available to order: typical lead time 5–10 working days. We confirm the exact date after your order or enquiry.
Anniversary offer until 31 December 2026 — free HEPA H14 filter: order two TAC V+ TOWER, TAC M or TAC M TOWER (any combination), add the original HighFlow HEPA H14 filter to your basket, and its price is deducted in full at checkout. No code needed. Alternatively, the code TAC100 takes EUR 100 off any two TAC machines from our Special Deals. The two offers cannot be combined.
Filters included — ready to run: the heat-resistant HEPA H14 main filter and the F7 pre-filter are installed ex works, so the unit is operational straight out of the packaging. The matching original replacement is the HighFlow HEPA H14 metal-frame filter (Art. 7.160.000.106) — see the filter photo in the gallery.
The TROTEC TAC M TOWER is the stationary tower variant of the TAC M series. It delivers the same FlowMatic-regulated 1,200 m³/h of HEPA H14 clean air as the mobile TAC M, but in a slim, space-saving tower footprint made for permanent installation. Certified to EN 1822 with 99.995% separation at the most-penetrating particle size, it suits offices, classrooms and treatment rooms where the unit stays in place.
How it works
The TAC M TOWER cleans by mechanical HEPA H14 filtration alone. Room air passes an F7 pre-filter and is then driven through the heat-resistant certified HEPA H14 element, which separates 99.995% of airborne particles at MPPS — fine dust, aerosols and other airborne particles. FlowMatic constant-volume regulation keeps the delivered clean-air rate steady as the filter loads over its service life.
Key benefits
- Slim tower footprint — 506 × 523 mm base fits neatly against a wall for fixed installation.
- High clean-air output — 1,200 m³/h at H14 for larger occupied rooms.
- FlowMatic constant volume — steady delivered airflow throughout the filter life.
- Programmable touchscreen — scheduling and settings secured with a PIN lock.
- True HEPA H14 separation — 99.995% efficiency at MPPS per EN 1822 with a heat-resistant element.
Typical applications
- Offices, open-plan and meeting rooms
- Schools, classrooms and lecture halls
- Medical practices and treatment rooms
- Waiting areas and reception spaces
- Any room needing permanent, unobtrusive air cleaning
Technical data
- Article number: 1.580.010.145 / .146 / .147 / .148 (colour variants)
- Filter class: HEPA H14 per EN 1822, heat-resistant element · 99.995% separation at MPPS
- H14 airflow (nominal): 1,200 m³/h
- H13 airflow: up to 1,400 m³/h
- Maximum airflow: 2,100 m³/h
- Sound level: 29–50 dB(A) at 1 m
- Dimensions (L × W × H): 506 × 523 × 1,100 mm (slim stationary tower)
- Weight: 76.7 kg including filter
- Power: 0.14 kW @ 900 m³/h · 0.75 kW maximum
- Mains: 220–240 V, 50/60 Hz · 3.5 A · IP23
- Pre-filter: F7 (EN 779:2002)
- Control: Programmable touchscreen with PIN lock
- FlowMatic: Yes
- Thermal decontamination: No (TAC V+ exclusive feature)
- Compliance: CE marked · EN 1822 · Made in Germany
Genuine TROTEC equipment — CE marked and Made in Germany, supplied with full manufacturer documentation by BMB Rheinland, your authorised TROTEC distributor.
Planning a project or a larger requirement? Request a quote.
Downloads
Manufacturer information (GPSR)
Manufacturer: Trotec GmbH, Grebbener Strasse 7, 52525 Heinsberg, Germany, info@trotec.de, de.trotec.com
Product identification: model and article number as stated on this page and on the type plate.
Safety information and warnings: see the operating manual of the manufacturer supplied with the product.
Product compliance and certifications depend on the specific product and manufacturer.
CE marking: Products carry CE marking where required by applicable EU legislation. The relevant conformity information is provided in the manufacturer's documentation where legally required.
Product-specific standards: Applicable standards, certifications, and classifications, such as HEPA filter classes under EN 1822 or hygiene requirements under VDI 6022, are indicated in the product specifications or manufacturer documentation where verified.
Manufacturer and origin: Products are supplied under their respective manufacturer's brand. The country of origin, quality management certifications, and other manufacturer-specific information are stated only where verified.
Documentation: Available technical information, operating instructions, and conformity documents can be found in the Downloads section or obtained from us upon request, where available. Legally required product documentation is provided in accordance with applicable requirements.
Delivery: We supply business customers and consumers within the European Union, subject to product availability and applicable delivery conditions. Delivery costs and estimated delivery times are provided during the ordering process or in our individual quotation. Freight and pallet deliveries can be arranged depending on the product and delivery address.
Delivery times: The delivery period applicable to your order is stated before purchase or in the individual quotation. For orders requiring separate confirmation, we provide the applicable delivery information before the contract is concluded.
Statutory rights: All customers retain their applicable statutory rights in respect of defective goods. For consumers purchasing new goods, statutory defect claims generally have a limitation period of two years from delivery, subject to applicable legal provisions. Any separate manufacturer's warranty applies only where expressly offered and does not limit statutory rights against us as the seller.
Consumer withdrawal: Consumers generally have a statutory right to withdraw from qualifying distance contracts within 14 days, subject to statutory exceptions. Further information is provided in our Withdrawal Policy (Widerrufsbelehrung).
Business customers: Business purchases are subject to the applicable statutory provisions and any validly agreed contractual conditions. Commercial buyers must comply with their statutory inspection and notification obligations where applicable, including Section 377 of the German Commercial Code (HGB).
Returns and complaints: Please contact us regarding returns, incorrect deliveries, or defective goods so that we can coordinate the next steps. Further information is provided in our Refund Policy and General Terms and Conditions. These policies do not restrict mandatory statutory rights.
For project, bulk, and pallet orders, please contact us for an individual quotation.
