TROTEC TAC V+ TOWER — Flagship HEPA H14 Air Cleaning Unit with Thermal Decontamination
RRP is the manufacturer TROTEC's current recommended retail price for the German market including 19 % VAT. The comparison does not refer to a previous selling price of BMB Rheinland GmbH.
- HEPA H14 · EN 1822 certified
Available to order: typical lead time 5–10 working days. We confirm the exact date after your order or enquiry.
Anniversary offer until 31 December 2026 — free HEPA H14 filter: order two TAC V+ TOWER, TAC M or TAC M TOWER (any combination), add the original HighFlow HEPA H14 filter to your basket, and its price is deducted in full at checkout. No code needed. Alternatively, the code TAC100 takes EUR 100 off any two TAC machines from our Special Deals. The two offers cannot be combined.
Filters included — ready to run: the HighFlow heat-resistant HEPA H14 main filter and the F7 pre-filter are installed ex works, so the unit is operational straight out of the packaging. The automatic 100 °C thermal decontamination requires exactly this heat-resistant filter type; the matching original replacement is the HighFlow HEPA H14 metal-frame filter (Art. 7.160.000.106) — see the filter photo in the gallery.
The TROTEC TAC V+ TOWER is the flagship of the TAC range — a stationary HEPA H14 air-cleaning tower that combines FlowMatic constant-volume regulation, a USB-updateable touchscreen with PIN lock and fully automatic thermal filter decontamination at 100 °C. It delivers up to 1,200 m³/h of H14 clean air. According to TROTEC, its thermal decontamination technology was tested by the Fraunhofer Institute for Building Physics IBP, and the TAC V+ was examined in studies by Prof. Dr. Kähler at the University of the German Federal Armed Forces Munich.
How it works
Air cleaning is by mechanical HEPA H14 filtration. Room air passes an F7 pre-filter and is then driven through the HighFlow heat-resistant HEPA H14 element, which separates 99.995% of airborne particles at the most-penetrating particle size — fine dust, aerosols and other airborne particles. What sets the V+ apart is a fully automatic regeneration cycle that heats the loaded filter to 100 °C to thermally decontaminate it; combined with FlowMatic constant-volume control, this keeps performance stable and extends filter life to 2–4 years.
Key benefits
- Thermal filter decontamination — automatic 100 °C regeneration cycle for safe handling and a filter life of 2–4 years.
- Scientifically examined — thermal decontamination tested by the Fraunhofer Institute for Building Physics IBP; the TAC V+ was studied by Prof. Dr. Kähler (University of the German Federal Armed Forces Munich).
- FlowMatic constant volume — delivered clean-air rate held steady across the filter life.
- USB-updateable touchscreen — programmable control with PIN lock and field-updatable firmware.
- True HEPA H14 HighFlow — 99.995% separation at MPPS per EN 1822 with a heat-resistant element.
Typical applications
- Schools, universities and lecture halls
- Offices, conference and board rooms
- Medical practices, clinics and treatment rooms
- Public authorities, courts and high-occupancy institutional spaces
- Any setting demanding reliable clean air and low long-term filter cost
Technical data
- Article number: 1.580.010.150 / .151 / .152 / .153 (colour variants)
- Filter class: HEPA H14 HighFlow heat-resistant per EN 1822 · 99.995% separation at MPPS
- H14 airflow (nominal): 1,200 m³/h
- H13 airflow: up to 1,400 m³/h
- Maximum airflow: 2,100 m³/h
- Sound level: 29–50 dB(A) at 1 m
- Dimensions (L × W × H): 506 × 523 × 1,270 mm (770 mm width with optional sound caps)
- Weight: 86.5 kg including filter
- Power: 0.14 kW @ 900 m³/h · 0.79 kW continuous max · 1.25 kW short-term peak during filter regeneration
- Mains: 220–240 V, 50/60 Hz · 5.5 A · IP23 · H07RN-F cable
- Pre-filter: F7 (EN 779:2002)
- Control: USB-updateable programmable touchscreen with PIN lock
- FlowMatic: Yes
- Thermal decontamination: Yes — automatic 100 °C filter-regeneration cycle (extends filter life to 2–4 years)
- Compliance: CE marked · EN 1822 · Made in Germany
Genuine TROTEC equipment — CE marked and Made in Germany, supplied with full manufacturer documentation by BMB Rheinland, your authorised TROTEC distributor.
Planning a project or a larger requirement? Request a quote.
Downloads
Manufacturer information (GPSR)
Manufacturer: Trotec GmbH, Grebbener Strasse 7, 52525 Heinsberg, Germany, info@trotec.de, de.trotec.com
Product identification: model and article number as stated on this page and on the type plate.
Safety information and warnings: see the operating manual of the manufacturer supplied with the product.
Product compliance and certifications depend on the specific product and manufacturer.
CE marking: Products carry CE marking where required by applicable EU legislation. The relevant conformity information is provided in the manufacturer's documentation where legally required.
Product-specific standards: Applicable standards, certifications, and classifications, such as HEPA filter classes under EN 1822 or hygiene requirements under VDI 6022, are indicated in the product specifications or manufacturer documentation where verified.
Manufacturer and origin: Products are supplied under their respective manufacturer's brand. The country of origin, quality management certifications, and other manufacturer-specific information are stated only where verified.
Documentation: Available technical information, operating instructions, and conformity documents can be found in the Downloads section or obtained from us upon request, where available. Legally required product documentation is provided in accordance with applicable requirements.
Delivery: We supply business customers and consumers within the European Union, subject to product availability and applicable delivery conditions. Delivery costs and estimated delivery times are provided during the ordering process or in our individual quotation. Freight and pallet deliveries can be arranged depending on the product and delivery address.
Delivery times: The delivery period applicable to your order is stated before purchase or in the individual quotation. For orders requiring separate confirmation, we provide the applicable delivery information before the contract is concluded.
Statutory rights: All customers retain their applicable statutory rights in respect of defective goods. For consumers purchasing new goods, statutory defect claims generally have a limitation period of two years from delivery, subject to applicable legal provisions. Any separate manufacturer's warranty applies only where expressly offered and does not limit statutory rights against us as the seller.
Consumer withdrawal: Consumers generally have a statutory right to withdraw from qualifying distance contracts within 14 days, subject to statutory exceptions. Further information is provided in our Withdrawal Policy (Widerrufsbelehrung).
Business customers: Business purchases are subject to the applicable statutory provisions and any validly agreed contractual conditions. Commercial buyers must comply with their statutory inspection and notification obligations where applicable, including Section 377 of the German Commercial Code (HGB).
Returns and complaints: Please contact us regarding returns, incorrect deliveries, or defective goods so that we can coordinate the next steps. Further information is provided in our Refund Policy and General Terms and Conditions. These policies do not restrict mandatory statutory rights.
For project, bulk, and pallet orders, please contact us for an individual quotation.
