TROTEC VE 4 S – Side Channel Blower (MultiQube System)
- Original TROTEC · CE marked
Available to order: typical lead time 5–10 working days. We confirm the exact date after your order or enquiry.
The TROTEC VE 4 S is the no-frills workhorse among the MultiQube side channel blowers: 150 m³/h air flow from a 1.1 kW motor, usable in both suction and pressure operation, at the sharpest price point in its class. It dries insulation layers of up to 40 m² in negative-pressure mode and up to 50 m² in positive-pressure mode, and its impact-resistant ABS housing stacks flush with every other MultiQube module on site and in the van.
How it works
Access openings are drilled through the screed into the insulation layer. In suction mode the VE 4 S pulls the moist air out of the insulation through these openings — always combined with an upstream MultiQube water separator and filter chain that captures water and particles before the air stream reaches the blower. In pressure mode the flow is reversed and the blower pushes air into the insulation layer, forcing the moisture out through relief openings. A 3 mm protective grille on the intake and outlet channels keeps coarse particles out of the compressor stage.
Key benefits
- Best price-performance in its class — ammeter, operating hours counter, cable rewind and service socket are all standard equipment.
- Suction and pressure operation — one unit covers both insulation drying methods, up to 40 m² (suction) or 50 m² (pressure).
- Service socket for a dehumidifier — connect the condenser dryer directly at the blower and keep the installation compact.
- Built for site handling — stackable ABS housing, quality castors with roll-stop detent and floor-friendly solid rubber tyres, recessed controls, quick-release maintenance fasteners.
- Durable by design — high-temperature bearings, reserve fuse and integrated cable holders for long, unattended drying assignments.
Typical applications
- Insulation layer drying after water damage in residential and commercial buildings
- Screed insulation drying in suction or pressure setups with MultiQube modules
- Fleet equipment for restoration contractors and drying services
Technical data
- Article number: 1.560.000.024
- EAN: 4052138002995
- Air flow (max., free-blowing): 150 m³/h
- Max. vacuum: 175 mbar / max. pressure: 200 mbar
- Recommended area: 40 m² (suction) / 50 m² (pressure)
- Power consumption: 1.1 kW
- Power supply: 230 V / 50 Hz, nominal current 7.5 A, recommended fuse 16 A
- Cable length: 3 m, plug CEE 7/7
- Dimensions (L × W × H): 420 × 430 × 415 mm
- Weight: 25.5 kg, stackable ABS housing
Genuine TROTEC equipment — CE marked and Made in Germany, supplied with full manufacturer documentation by BMB Rheinland, your authorised TROTEC distributor.
Planning a project or a larger requirement? Request a quote.
Downloads
Manufacturer information (GPSR)
Manufacturer: Trotec GmbH, Grebbener Strasse 7, 52525 Heinsberg, Germany, info@trotec.de, de.trotec.com
Product identification: model and article number as stated on this page and on the type plate.
Safety information and warnings: see the operating manual of the manufacturer supplied with the product.
Product compliance and certifications depend on the specific product and manufacturer.
CE marking: Products carry CE marking where required by applicable EU legislation. The relevant conformity information is provided in the manufacturer's documentation where legally required.
Product-specific standards: Applicable standards, certifications, and classifications, such as HEPA filter classes under EN 1822 or hygiene requirements under VDI 6022, are indicated in the product specifications or manufacturer documentation where verified.
Manufacturer and origin: Products are supplied under their respective manufacturer's brand. The country of origin, quality management certifications, and other manufacturer-specific information are stated only where verified.
Documentation: Available technical information, operating instructions, and conformity documents can be found in the Downloads section or obtained from us upon request, where available. Legally required product documentation is provided in accordance with applicable requirements.
Delivery: We supply business customers and consumers within the European Union, subject to product availability and applicable delivery conditions. Delivery costs and estimated delivery times are provided during the ordering process or in our individual quotation. Freight and pallet deliveries can be arranged depending on the product and delivery address.
Delivery times: The delivery period applicable to your order is stated before purchase or in the individual quotation. For orders requiring separate confirmation, we provide the applicable delivery information before the contract is concluded.
Statutory rights: All customers retain their applicable statutory rights in respect of defective goods. For consumers purchasing new goods, statutory defect claims generally have a limitation period of two years from delivery, subject to applicable legal provisions. Any separate manufacturer's warranty applies only where expressly offered and does not limit statutory rights against us as the seller.
Consumer withdrawal: Consumers generally have a statutory right to withdraw from qualifying distance contracts within 14 days, subject to statutory exceptions. Further information is provided in our Withdrawal Policy (Widerrufsbelehrung).
Business customers: Business purchases are subject to the applicable statutory provisions and any validly agreed contractual conditions. Commercial buyers must comply with their statutory inspection and notification obligations where applicable, including Section 377 of the German Commercial Code (HGB).
Returns and complaints: Please contact us regarding returns, incorrect deliveries, or defective goods so that we can coordinate the next steps. Further information is provided in our Refund Policy and General Terms and Conditions. These policies do not restrict mandatory statutory rights.
For project, bulk, and pallet orders, please contact us for an individual quotation.
